Partek Flow Documentation

Page tree
Skip to end of metadata
Go to start of metadata

If you wish to move a Partek Flow project data from one disk to another and continue using the project, please follow the steps below:

  1. Use rsync to copy the project data from the old disk to the new disk.  For example, if you wish to move Project A from an internal disk to an external drive mounted as hdd: 

    $ rsync -avr /home/user/FlowData/Project_A /mnt/HDD/FlowData2/Project_A

    Using rsync -avr guarantees that the time stamps would not change.
     

  2. In Partek Flow, logon as a user with Admin privileges. Go to Settings>Directory permissions page

  3. In the Directory Reassignment section, type the Former directory and select the Current directory (Figure 1)

    For example: 
      • Former directory: /home/user/FlowData/Project_A
      • Current directory: /mnt/HDD/FlowData2/Project_A


    Figure 1: Directory Reassignment


  4. Select Reassign button

  5. Open the project. 

      • In the Analyses tab, check if the Project disk space on the lower right has been updated
      • In the Data tab, check the project output directory has changed to the new directory
         
  6. You can now remove the former directory


Additional Assistance

If you need additional assistance, please visit our support page to submit a help ticket or find phone numbers for regional support.

 


Your Rating: Results: 1 Star2 Star3 Star4 Star5 Star 29 rates

1 Comment